Franklin County, IL · Equipment Repair

Down Equipment
Costs Real Money.

Hydraulics, undercarriage, welding repair, engine service. Field service and shop work. We're operators. We know what it takes to get a machine running and keep it running.

4
Repair Disciplines
2
Ways to Work. Field & Shop
10+
Years Running & Wrenching
1
Call to Get Started

Why It Matters Who Does This

We Run This Equipment.
We Know What Actually Fails.

Most equipment repair shops work from a parts counter. They see machines after they've been trailered in, diagnose from symptom codes, and order whatever the manual says. That's fine for routine service.

We're on machines every week doing production work. When a hydraulic cylinder starts drifting, we've felt it happen under load. When an undercarriage wears unevenly, we know what the operator was doing that caused it. That context changes how we diagnose and what we recommend: fewer unnecessary part replacements, faster root cause, and repairs that actually hold.

We do field calls and shop work. Either way, you're dealing with people who have driven the machine you're paying us to fix.

Call 618·417·7381 →
Field+
Shop. Both options available
Same
Day
Field calls when possible
7
Counties covered
No.
Unnecessary upsells

What We Fix

Four Disciplines.
One Shop.

01 · Hydraulics

Hydraulic Repair

Hydraulic failures are the most common reason a machine goes down mid-job. We handle seal work, fittings, lines, and component replacement. Rechroming and machine work on rod ends go out to a specialist.

  • Line, hose, and fitting repair and replacement
  • Cylinder reseal and seal kit rebuild
  • Pump, motor, and control valve replacement
  • Leak trace and pressure testing
  • Quick coupler and auxiliary plumbing
02 · Undercarriage

Undercarriage Repair

Undercarriage is usually the biggest maintenance cost on a track machine. We inspect, measure, and replace worn components before they turn a normal wear item into a structural problem.

  • Track shoe and pad replacement
  • Roller and idler replacement
  • Sprocket and carrier roller service
  • Track adjuster and recoil spring
  • Undercarriage wear measurement and reporting
03 · Welding & Repair

Welding & Repair

Cracked buckets, worn cutting edges, broken attachments. We fix what breaks instead of waiting three weeks on an OEM part. Repair work, not custom builds. Shop or on-site with a mobile rig.

  • Bucket repair, cutting edge, and tooth replacement
  • Wear plate installation and hard-facing
  • Structural crack and fatigue repair
  • Attachment repair and reinforcement
  • On-site mobile welding
04 · Engine Service & Drivetrain

Engine Service & Drivetrain

Routine service and bolt-on component work that keeps a machine running. We do not tear into engines and we do not do internal rebuilds. If that is what yours needs, we will tell you straight and point you to a shop that does.

  • Oil, filter, and scheduled service intervals
  • Water pumps, alternators, and starters
  • Serpentine belts and hose replacement
  • Cooling system service and repair
  • Final drive and travel motor removal and replacement

How We Work

We Come to You.
Or You Come to Us.

Field Service

We Come to the Machine

If your equipment is down on a job site and moving it isn't practical, we come to you. We bring the tools and parts for common repairs and do what we can on-site. What we can't finish in the field, we give you a straight answer on before we leave.

  • Franklin County and surrounding counties
  • Hydraulic line and fitting repair
  • Minor electrical and fuel system work
  • Mobile welding and on-site repair
  • Call first. 618·417·7381
Shop Work

Bring It to the Shop

Cylinder reseals, undercarriage work, and heavier welding are better done in the shop where we have the right equipment. We give you an assessment and a number before we start any paid work. No surprises when you come to pick it up.

  • Cylinder reseal and seal kit rebuild
  • Pump, motor, and valve replacement
  • Final drive and travel motor swaps
  • Undercarriage component replacement
  • Structural crack and heavy welding repair

Equipment We Work On

If It Does Dirt Work,
We Work on It.

Excavators
Track & wheeled
Bulldozers
Crawler dozers
Skid Steers
Wheeled & CTL
Track Loaders
Compact & full-size
Backhoes
Loader backhoes
Motor Graders
Road graders
Wheel Loaders
Articulating loaders
Ag Equipment
Tractors & implements

Not on the list? Call and ask. 618·417·7381

We also run directional boring for utility, water, and conduit installs across the same counties.

Common Questions

FAQ

Do you come to the job site for equipment repair?

Yes. We run field service calls across Franklin County and the counties that border it. If your machine is down on a job site and you need it running, call 618-417-7381. We come to you, assess what it needs, and get it moving again or tell you straight what it needs to come into the shop.

What types of equipment do you work on?

Excavators, bulldozers, skid steers, track loaders, motor graders, backhoes, and other heavy construction and agricultural equipment. If it runs on tracks or does dirt work, we work on it. Call 618-417-7381 if you're not sure whether we can help with your specific machine.

Do you do emergency or after-hours calls?

Call 618-417-7381 and tell us what you have. Down equipment on a production job costs real money and we understand that. We do what we can to get to urgent situations quickly. We're not going to promise a 24-hour hotline, but we pick up and we respond.

Can you repair damaged buckets and attachments?

Yes. Bucket repair, wear plate installation, tooth and cutting edge replacement, and structural crack repair are all things we do in the shop or on-site. We are a repair shop, not a custom fabrication shop, so if you need something built from scratch we are not your outfit.

What counties do you cover for equipment repair?

We serve Franklin County and the counties that directly border it: Jefferson, Wayne, Hamilton, Williamson, Jackson, and Perry. We're based in Benton. For jobs further out, call us and we'll tell you whether we can make it work.

How long does hydraulic repair typically take?

It depends on what failed. A blown line or fitting we can often fix on-site same day. A cylinder reseal or pump replacement typically takes one to three days depending on parts availability. We look at it first, give you a timeline and a number, then you decide how you want to proceed.

Get It Running

One Call.
We'll Figure Out
What It Needs.

Tell us what machine, what it's doing, and where it's at. We'll get you a plan: field call or shop, same-day or scheduled.

Call 618·417·7381 →